The Fitzgerald Black Label Case Standard Load Out
The Battle Foam Black Label Cases are made from ultra high-strength polypropylene copolymer resin. They feature a gasketed, water and dust tight, submersible design. They also feature a latch system, comfortable, ergonomic snap-down rubber over-molded grip handle and automatic pressure equalization valve. They are resistant to UV, solvents, fungus, corrosion and impact damage.
This case can fit 7 inches of Fitzgerald Black Label size foam trays. With this load out option, you will receive the following foam trays:
- 2x Fitzgerald Troop Foam Tray - 2 inch (50 mm) thick tray with 24x 1 x 1 inch (25 x 25 mm) cut outs, 9x 1 1/2 x 1 1/2 inch (38 x 38 mm) cut outs, 6x 2 3/4 x 1 1/4 inch (70 x 32 mm), 3x 2 3/4 x 1 1/2 inch (70 x 38 mm) cut outs, 1x 2 1/4 x 1 1/4 inch (57 x 32 mm) cut out, 1x 3 1/4 x 2 1/4 inch (83 x 57 mm) cut out and 1x 3 1/2 x 2 1/4 inch (89 x 57 mm) cut out.
- 1x Fitzgerald 2.5 inch (63 mm) thick Pluck Foam Tray with wheel etchings. The pluck foam pieces are 3/4 inch (19 mm) squares. At times, pluck foam trays may require an exacto blade to cut through portions of the foam.
- 1x Fitzgerald Foam Topper
Custom text is not available on this product.
Tray Dimensions - 20W x 11L" (508W x 279L mm)
Inside Case Dimensions - 20W x 11L x 7H" (508W x 279L x 178H mm)
Due to the wheels on this case, the bottom tray must be a Fitzgerald Black Label foam tray with wheel etchings.
(P.A.C.K. C4 pictured is for size comparison only and must be purchased separately.)
To view bundles including this case, click here: http://us.battlefoam.com/black-label-2-0/
Warning: This foam design is intellectual property of Battle Foam and it is protected by Copyright Laws. Unauthorized reproduction of this design is prohibited by Federal Law and is subject to criminal prosecution.